BACKUP LAMPS

7" Backup Lamps
Weldon’s 7" backup lamps are available in LED and incandescent. Commonly used with the 1000 and 1010 stop, tail, turn lamps.

LED, 9186-5585-30 Series
• Low amp draw
• Fully Encapsulated Electronics
• Flat back design

Order Nos.

Desc.

Amp Draw 12V

9186-5585-30

7", ECON. LED, BLACK BASE

.26

Incandescent, 1013 Series
• Your choice of chrome flange or black base
• Available in flat back or socket back

Order Nos.

Desc.

Amp Draw 12V

1013-1100-30

7", SOCKET BACK, BLACK BASE, #1141 BULB, CLEAR

1.9

1013-6300-30

7", FLAT BACK, CHROME FLANGE, #1141 BULB, CLEAR

1.9

1013-7100-30

7", FLAT BACK, BLACK BASE, #1141 BULB, CLEAR

1.9

1003-1000-30

REPL. LENS, ACRYLIC, CLEAR

1014-0000-00

REPL. GASKET, LENS

1015-0000-00

REPL. MOUNTING PAD FOR PANEL MOUNT

1016-0000-00

REPL. MOUNTING PAD FOR CHROME FLANGE MOUNT

9018-0019-00

REPL. BULB #1141, 21CP


3 7/8” Backup, 9186-4570 Series
This lamp can be used as a backup or utility lamp.
• Polycarbonate lens
• ABS housing for a rust-free life

Order Nos.

Desc.

Amp Draw 12V

9186-4570-30

BLACK BEZEL, 1 WIRE, #1156 BULB

2.1

9186-4571-30

BLACK BEZEL, 2 WIRE , #1076 BULB

2.1

9018-0013-00

REPL. BULB, #1156, 32CP

9018-0025-00

REPL. BULB, #1076, 32CP

4” Backup, 9186-5000 Series

These 4” backup lights are fully sealed to prevent dirt and moisture infiltration. The 9186-5515 flange mount secures the lamp to the vehicle and a MP150 connector provides a quick connection. The kit includes the lamp, mounting grommet and plug. Grommet mount can be used with our 0J10-0503-00 bracket.
• Polycarbonate lens
• Sealed lamp
• “Sure seal” connector

Order Nos.

Desc.

Amp Draw 12V

9186-5300KC

4” BACKUP, CLEAR, INCAND, GROMMET MT W/ METRIPACK CON.

2.1

9186-5515-31

4” BACKUP, CLEAR LED, FLANGE MT, W/METRIPACK CON.

.34

9186-5526-30

4” BACKUP, CLEAR LED GROMMET MT.

.34

5.25” RECESSED MOUNT BACKUP
This lamp features a durable lens and housing for maximum service. The 1060 series is also used as a compartment, interior or utility light.

1060 SERIES
• Corrosion-resistant finish
• Mounts with only four screws
• Meets DOT backup lamp requirements

Order Nos.

Description

Amp Draw

Ctn.

1060-1100-30

REC MOUNT, #1156 BULB, CLEAR

2.1

100

1060-9100-30

REC MOUNT, 1 WIRE, #1156 BULB, INTERIOR DOME, CLEAR

2.4

100

1060-9200-30

REC MOUNT, 2 WIRES, #1142 BULB, INTERIOR DOME, CLEAR

1.4

100

Order Nos.

Service Parts for 1060 Series

Ctn.

1062-0000-30

LENS, ACRYLIC, CLEAR

12

1063-0000-00

GASKET, MOUNTING

12

1063-0001-00

GASKET, MOUNTING GRAY

12

1064-0000-00

GASKET, LENS

12

9018-0013-00

BULB: #1156, 32CP

100

9018-0042-00

BULB: #1142 21CP

100

1.75” x 6” SURFACE-MOUNT, BACKUP SERIES (2025-2035 SERIES)
The pillow optics in these lamps makes this series functional as well as attractive. This series can be used as a compartment or utility lamp.

2025-2035 SERIES
• Your choice of vertical or horizontal mount
• Flat or socket back option for horizontal mount
• Meets DOT backup lamp requirements

Order Nos.

Description

Amp Draw

Ctn.

2025-7100-30

2”X6”, VERTICAL MOUNT, FLAT BACK, #1156 BULB, CLEAR

2.1

96

2035-1100-30

2”X6”, HORIZONTAL MOUNT, SOCKET BACK, #1156 BULB, CLEAR

2.1

96

2035-7100-30

2”X6”, HORIZONTAL MOUNT, FLAT BACK, #1156 BULB, CLEAR

2.1

96

Order Nos.

Service Parts for 2025-2035 Series

Ctn.

2027-0000-30

LENS, VERTICAL, CLEAR

12

2037-0000-30

LENS, HORIZONTAL, CLEAR

12

2028-0000-00

GASKET, LENS

12

2029-0000-00

MOUNTING PAD

12

9018-0013-00

BULB: 1156

100

3800-4600-7800 SERIES BACKUP
These lamps feature a lens and reflector that are sealed eliminating problems associated with moisture and dust infiltration. Available in LED and incandescent.

• Unsurpassed light output
• Sealed lens and reflector
• Incandescent available in panel or chrome flange mount
• Low amp draw for LED

Order No. Desc. Amp Draw Cnt.
3841-0000-30 3"X7" PANEL MOUNT, #1156 BULB, CLEAR 2.1 6
3842-0000-30 3"X7" BEZEL MOUNT, #1156 BULB, CLEAR 2.1 6
3871-8000-30 3"X7" LED, PANEL MOUNT, CLEAR 0.62 6
3872-8000-30 3"X7" LED, BEZEL MOUNT, CLEAR 0.62 6
4641-0000-30 4"X6" PANEL MOUNT, #1156 BULB, CLEAR 2.1 6
4642-0000-30 4"X6" BEZEL MOUNT, #1156 BULB, CLEAR 2.1 6
4671-8000-30 4"X6" LED, PANEL MOUNT, CLEAR 0.62 6
4672-8000-30 4"X6" LED, BEZEL MOUNT, CLEAR 0.62 6
7841-0000-30 7"X9" PANEL MOUNT, #1156 BULB, CLEAR 2.1 6
7842-0000-30 7"X9" BEZEL MOUNT, #1156 BULB, CLEAR 2.1 6

Order No. Service Parts for 3800-4600-7800 Backup Cnt.
0C90-0350-33 LENS/REFL ASSY, BACKUP, 4600 12
0C90-1028-33 LENS/REFL ASSY, BACKUP, 3800 12
0C90-1138-33 LENS/REFL ASSY, BACKUP, 7800 12
0D30-0377-00 MOUNTING PAD, 4600 SERIES, BEZEL MOUNT 12
0D30-0385-00 MOUNTING PAD, 4600 SERIES, PANEL MOUNT 12
0D30-1026-00 MOUNTING PAD FOR 3800 SERIES, BEZEL MOUNT 12
0D30-1027-00 MOUNTING PAD FOR 3800 SERIES, PANEL MOUNT 12
0D30-1136-00 MOUNTING PAD, 7800 SERIES, BEZEL MOUNT 12
0D30-1137-00 MOUNTING PAD, 7800 SERIES, PANEL MOUNT 12
0K90-0336-00 SOCKET, SINGLE CONTACT 10
9018-0013-00 BULB: #1156, 32CP 100
0K90-1291-10 2 - WIRE LED PLUG ASSY 12





AUXILIARY LAMPS

7" AUXILIARY LAMPS
Weldon's 7" auxiliary lamps are available in LED and incandescent. Commonly used with the 1000 and 1010 stop, tail, turn lamps.

LED, 1010-8100 SERIES
• Low amp draw
• Flat back design
• Black base

Order No. Desc. Amp Draw Cnt.
1010-8100-30 7", AUXILLIARY BACKUP, LED, NO PLUG/WIRES, BLACK BASE, WHITE
.45 12
1010-8110-30 7", AUXILLIARY BACKUP, LED w/PLUG/WIRES, BLACK BASE, WHITE .45

12

INCANDESCENT, 1000-1010 SERIES
• Your choice of chrome flange or black base
• Available in flat back or socket back

Order No. Desc. Amp Draw Cnt.
1010-0300-30 7" AUXILLIARY, SOCKET BACK, CHROME FLANGE, #1156 BULB, CLEAR 2.1 32
1010-1100-30 7" AUXILLIARY, SOCKET BACK, BLACK BASE, #1156 BULB, CLEAR 2.1 48
1010-6300-30 7" AUXILLIARY, FLAT BACK, CHROME FLANGE, #1156 BULB, CLEAR
 2.1 32

Order No. Service Parts for 1000-1010 Series Cnt.
1003-0000-30 LENS, ACRYLIC, CLEAR 12
1014-0000-00 GASKET, LENS 12
1015-0000-00 MOUNTING PAD FOR PANEL MOUNT 12
1016-0000-00 MOUNTING PAD FOR CHROME FLANGE MOUNT 12
9018-0013-00 BULB: #1156, 32CP 100
0K90-1549-10 PLUG ASSY FOR LED LAMPS 12
Note: LEDs are sealed, no lens replacement available



7" x 8" AUXILIARY, UTILITY SERIES (2010 SERIES)
This lamp series is available with a black or chrome body. Commonly used with the 2000 arrow series and 2010 stop, turn & tail lamps on school, commercial buses and emergency vehicles.

2010 SERIES
• Chrome or black base
• Flat or socket back

Order No. Desc. Amp Draw Cnt.
2010-0300-30 7"X8", SOCKET BACK, CHROME BASE, #1156 BULB, CLEAR 2.1 32
2010-1100-30 7"X8", SOCKET BACK, BLACK BASE, #1156 BULB, CLEAR 2.1 32
2010-6300-30 7"X8", FLAT BACK, CHROME BASE, #1156 BULB, CLEAR 2.1 32
2010-7100-30 7"X8", FLAT BACK, BLACK BASE, #1156 BULB, CLEAR 2.1 32
2010-9110-30 7"X8", FLAT BACK, BLACK BASE, #1076 BULB, CLEAR 2.1 32

Order No. Desc. Cnt.
2011-0000-30 LENS, ACRYLIC, CLEAR 12
2003-0000-00 GASKET, LENS 12
2004-0000-00 MOUNTING PAD 12
9018-0013-00 BULB: #1156, 32CP 100
9018-0025-00 BULB: #1076, 32CP 100






Weldon, a division of Akron Brass & Akron Brass Company are ISO 9001: 2000 Registered Companies