| MARKER LAMPS
|
|
3.5" x 1.5" MARKER LAMPS w/Built-In Shield (5150-5170 SERIES)
The LED lamp is rated for 100,000 hours of service! Both lamps have a light spread of 270 degrees, meeting both clearance and marker functions.
5150/5170 SERIES, LED and Incandescent
• Built-in shield
• Wide light spread
• Low amp draw
• LED operates in an 8 to 16 volt environment
| Order No. |
Service Parts for 5151-5170 Series |
Amp Draw |
Ctn. |
| 5150-0000-xx |
MARKER, INCANDESCENT, NO PLUG |
350MA |
200 |
| 5150-0100-xx |
MARKER, INCANDESCENT w/PLUG |
350MA |
200 |
| 5170-0100-xx |
MARKER, LED, NO PLUG |
85MA |
200 |
| 5170-0110-xx |
MARKER, LED w/PLUG |
85MA |
200 |
| 5170-0113-xx |
MARKER, LED w/AMP PLUG |
85MA |
200 |
|
Note: xxDenote (-10 red), (-20 amber)
|
| Order No. |
Service Parts for 5151-5170 Series |
Ctn. |
| 0D10-1630-00 |
MOUNTING PAD |
12 |
| 0K90-1803-00 |
PLUG ASSY FOR 5170 |
10 |
| 0K90-1804-00 |
PLUG ASSY FOR 5150 |
10 |
| 9018-0032-00 |
BULB: #168, FOR 5150 SERIES |
10 |
|
|
|
|
2.9" x 3.7" SIDE MARKER/TURN
This lamp functions has a clearance marker and side turn signal.
9186-8560 SERIES
• Stainless steel housing
• No rust or corrosion issues
• Off-the-shelf #1157 bulb
| Order No. |
Desc. |
Amp Draw |
Ctn. |
| 9186-8560-29 |
MARKER w/GROUND TAB, #1157 BULB, AMBER |
.59/2.1 |
50 |
| Order No. |
Service Parts for 9186-8560 Series |
Ctn. |
| 0C12-1181-00 |
LENS, POLYCARBONATE, AMBER |
12 |
| 0D10-1176-00 |
GASKET, LENS |
12 |
| 0D30-1092-00 |
MOUNTING PAD |
12 |
| 9018-0020-00 |
BULB: #1157, 32/3CP |
100 |
|
|
|
|
1.1" x 2.59" LED MARKER LAMP
9186-1500 SERIES
• Low amp draw
• Sonic-welded base and lens
• Offered in a variety of colors
• Stainless brush guard available
| Order No. |
Desc. |
Amp Draw |
Ctn. |
| 9186-1500-xx |
LED CLEARANCE/MARKER |
0.05 |
50 |
| 9186-1501-xx |
LED UTILITY LAMP |
0.05 |
50 |
|
NOTE: xxDenote (-10 red), (-20 amber), (-30 clear), (-50 green)
|
| Order No. |
Service Parts for 9186-1500 Series |
Ctn. |
| 0J10-1200-00 |
BRUSH GUARD, STAINLESS STEEL |
50 |
| 0D10-1530-00 |
MOUNTING PAD FOR 9186-1500 |
12 |
| 0D10-1208-00 |
MOUNTING PAD FOR BRUSH GUARD |
12 |
|
|
|
|
1.38" x 3.5" ECONOMY MARKER LAMP
The slim design of this lamp contains a snap-lock lens for secure yet easy bulb service.
9186-0500 SERIES
• Mounts on 2.75" centers
• Easy bulb service
| Order No. |
Desc. |
Amp Draw |
Ctn. |
| 9186-0500-xx |
SURFACE MOUNT, #193 BULB |
0.27 |
100 |
|
NOTE: xxDenote (-10 red), (-20 amber)
|
Order Nos. Description Amp Draw Ctn.
|
|
|
|
1.63" x 3.75" BUS MARKER LAMP
This popular series is common in the school and commercial bus markets. The addition of the 5006 armored shield makes this lamp almost unbreakable.
5000 SERIES
• Rugged steel base
• Grounds through the base
• Single or dual wire
| Order No. |
Desc. |
Amp Draw |
Ctn. |
| 5000-1400-xx |
MARKER, 1 WIRE, #168 BULB |
0.35 |
240 |
| 5000-1406-xx |
MARKER, 2 WIRE, #168 BULB |
0.35 |
240 |
|
NOTE: xxDenote (-10 red), (-20 amber)
|
| Order No. |
Service Parts for 5000 Series |
Ctn. |
| 5001-0000-00 |
GASKET, LENS |
12 |
| 5002-0000-10 |
LENS, ACRYLIC, RED |
12 |
| 5002-0000-20 |
LENS, ACRYLIC, AMBER |
12 |
| 5004-0001-00 |
MOUNTING PAD |
12 |
| 5006-0000-00 |
SHIELD FOR 5000 LAMP, SILVER |
144 |
| 5006-0001-00 |
SHIELD FOR 5000 LAMP, BLACK |
144 |
| 5008-0000-00 |
GASKET, SHIELD FIO 5000 |
12 |
| 9018-0032-00 |
BULB: #168, 3CP |
100 |
|
|
|
|
1.68" x 5.25" MARKER LAMP, two bulb design
This lamp has a bright chrome plated shield for years of service. This series is a direct replacement for the 5100 series.
5120 SERIES
• Bright, chrome-plated shield
• Your choice of one or two wires
• Dual bulb design
| Order No. |
Desc. |
Ctn. |
| 5120-1300-xx |
MARKER WITH SHIELD, 1 WIRE, 2 #193 BULBS |
60 |
| 5120-1306-xx |
MARKER WITH SHIELD, 2 WIRES , 2 #193 BULBS |
60 |
|
NOTE: xxDenote (-10 red), (-20 amber)
|
| Order No. |
Service Parts for 5120 Series |
Ctn. |
| 9018-0047-00 |
BULB, #193, 2CP |
100 |
| 5002-0000-10 |
LENS, ACRYLIC, RED |
12 |
| 5002-0000-20 |
LENS, ACRYLIC, AMBER |
12 |
| 5102-0000-00 |
MOUNTING PAD |
50 |
| 5009-0000-00 |
LENS GASKET |
12 |
|
|
|
|
TRIANGULAR MARKER LAMP – Now available in LED!
This rugged series is frequently used as an identification and clearance marker lamp. The 5051 requires assembly to complete installation.
5050-5051 SERIES
• Pass-through lens mounting screws
• LED lamp is sealed
• Armored shield available separately
| Order No. |
Desc. |
Amp Draw |
Ctn. |
| 5050-1400-xx |
MARKER, #168 BULB |
0.35 |
200 |
| 5050-1406-xx |
MARKER, 2 WIRE, #193 BULB |
0.35 |
198 |
| 5050-7000-xx |
MARKER, LED |
0.13 |
200 |
| 5051-1400-xx |
MARKER, #193 BULB |
0.33 |
198 |
| 5051-1406-xx |
MARKER, 2 WIRE, #193 BULB |
0.33 |
198 |
|
NOTE: xxDenote (-10 red), (-20 amber)
|
| Order No. |
Service Parts for 5050-5051 Series |
Ctn. |
| 5017-0000-00 |
GASKET, LENS |
12 |
| 5018-0000-00 |
MOUNTING PAD FOR 5050 |
12 |
| 5020-0000-10 |
LENS, ACRYLIC, 5050 SERIES, RED |
12 |
| 5020-0000-20 |
LENS, ACRYLIC, 5050 SERIES, AMBER |
12 |
| 5021-0000-10 |
LENS, ACRYLIC, 5051 SERIES, RED |
12 |
| 5021-0000-20 |
LENS, ACRYLIC, 5051 SERIES, AMBER |
12 |
| 5024-0000-00 |
GASKET FOR SHIELD |
12 |
| 5025-0000-00 |
SHIELD |
144 |
| 9018-0032-00 |
BULB: #168, 3CP
|
100 |
| 9018-0047-00 |
BULB: #193, 2CP
|
100 |
|
|
|
|
2" MARKER LAMP
All internal components are encapsulated in epoxy, eliminating the chance of premature failure due to dirt, moisture or corrosion.
9185-30503 SERIES
• Polycarbonate lens
• Sonically welded lamp
| Order No. |
Desc. |
Amp Draw |
Ctn. |
| 9185-30503R |
2" MARKER KIT, RED |
0.33 |
50 |
|
|
|
|
